www.hrdlog.net
Tuesday, March 25, 2008
Icom IC-706 Mk IIG
Assalamualaikum, kali ini saya kembali lagi dengan satu lagi rig,bukan baru atau lama, tetapi masih lagi diminati ramai. Icom IC 706Mk IIG. All band/all mode, seperti juga Yaesu FT 897D, cuma bezanya yang amat ketara, ianya tidak mempunyai compartment bagi bateri, dibandingkan dengan saiz nya yang agak compact,sesuai sekali bagi aktiviti 4x4 dan aktiviti luar yang lain. Ianya boleh ditambah dengan lain-lain aksesori seperti AH-4 Automatic Antenna Tuner + 50Mhz covers 3.5Mhz - 54 Mhz with 7 Mtr ( 23 feet)@ longer wire antenna dan AT 180 + 50 Mhz. jadi , buatlah pilihan yang sesuai dengan keperluan anda....!
Specifications:
Ultra Small: 6.6 (W) x 2.3 (H) x 7.9 (D), 5.5 lb
Power output: HF + 6 Meter: 5-100 Watts (SSB/CW/FM/RTTY), 2-40 W (AM);
2 Meter: 2.5-50 Watts (SSB/CW/FM/RTTY), 2-20 W (AM);
440MHz - 2-20 Watts (SSB/CW/FM/RTTY), 2-8 W (AM)
Frequency Coverage: Receive:
0.030 - 199.999 MHz*, 400 - 470 MHz*
Transmit:
1.8 - 1.999 MHz*
3.5 - 3.999 MHz*
7.0 - 7.300 MHz*
10.1 - 10.150 MHz
14.0 - 14.350 MHz
18.068 - 18.168 MHz
21.0 - 21.450 MHz
24.89 - 24.990 MHz
28.0 - 29.700 MHz
50.0 - 54.000 MHz*
144.0 - 148.000 MHz*
430.0 - 450.000 MHz*
* Varies according to version
Mode: USB, LSB, CW, RTTY (FSK), AM, FM, WFM (Rx only)
Number of memory channels. : 107 (99 regular, 6 scan edges, 2 call channels)
Antenna connector : SO-239x2 (for HF/50 MHz and 144/430 MHz)/50 ohms
Power supply requirement: 13.8 V � 15% (negative ground)
Frequency stability: Less than � 7ppm from 1 min. to 60 min. after power ON. After that rate of stability less than � 1 ppm/hr. at +25 �C (+77�F). Temperature fluctuations 0�C to +50�C (+32�F to +122�F) less than �5 ppm.
Current drain: Transmit max. power 20 A; Receive standby 1.8 A, max. audio 2.0 A
Usable temperature range : -10�C to 60�C (14�F to140�F)
Dimensions (projections not included): 167(W) X 58(H) X 200(D) mm
6-9/16(W) X 2-9/32(H) X 7-7/8(D) in
Weight: 2.45 kg (5 lb 6 oz)
CI-V connector: 2 conductor, 3.5 (d) mm (1/8")
ACC connector: 13 pin
Transmitter
Output power: SSB/CW/RTTY/FM AM
HF/50 MHz 5 - 100 W 2 - 40 W
144 MHz 2.5 - 50 W 2 - 20 W
440 MHz 2 - 20 W 2 - 8 W
Modulation system: SSB Balanced modulation
AM Low level modulation
FM Variable reactance modulation
Spurious emissions: Less than -60 dB (below 47.5 MHz: -50dB; 47.5 - 50 MHz: -50 to -60 dB; above 50 MHz: -60 dB)
Carrier suppression: More than 40 dB
Unwanted sideband: More than 50 dB
Microphone connector: 8 pin modular jack (600 ohm KEY connector: 3-conductor 6.35 (d) mm (1/4")
RTTY connector: 3-conductor 3.5 (d) mm (1/8")
Receiver
Receive system: SSB/CW/AM/WFM: Double superheterodyne
FM : Triple superheterodyne
Intermediate frequencies 1st 2nd 3rd
SSB/AM-N/FM 69.0115 MHz 9.0115 MHz 0.455 kHz (FM only)
CW 69.0106 9.0106 -
RTTY 69.0105 MHz 9.0105 MHz -
AM/FM-N 69.0100 MHz 9.0100 MHz 0.455 kHz (FM only)
WFM 70.7000 MHz 10.7000 MHz -
Receive sensitivity (preamp on, except 4- - 4.5 and 8 - 9 MHz) SSB/CW
10 dB S/N AM
10 dB S/N FM
12 dB SINAD WFM
12 dB SINAD
0.5 - 1.8 MHz - 13 �V - -
1.8 - 28 MHz 0.15 �V 2.0 �V - -
28 - 29.7 MHz 0.15 �V 2.0 �V 0.5 �V -
50 MHz band 0.12 �V 1.0 �V 0.25 �V -
76 - 108 MHz - - - 10.0 �V
144/440 MHz band 0.11 �V 1.0 �V 0.18 �V -
Squelch Sensitivity (threshold)SSB Less than 5.6 �V
FM Less than 0.3 �V
Selectivity (normal setting)SSB, CW, RTTY More than 2.4 kHz/- 6 dB
Less than 4.8 kHz/ -60 dB
AM/FM-N More than 8.0 kHz/-6 dB
Less than 30 kHz/-36 dB
FM More than 12 kHz/-6 dB
Less than 30 kHz/-60 dB
Spurious and image rejection ratio: SSB/CW/AM - More than 70 dB
Audio output power (at 13.8 V DC): More than 2.0 W at 10% distortion with an 8-ohm load
RIT variable range +/-9.99 kHz
PHONES connector: 3-conductor, 3.5 (d) mm (1/8")/8 ohms
EXT SP connector: 2-conductor, 3.5 (d) mm (1/8")/8 ohms
All stated specifications are subject to change without notice or obligation.
IC-706MKIIG Supplied Accessories
Hand microphone
DC power cable
Spare fuses
RTTY key plug
Electronic keyer plug
ACC cable
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment